2019 Seawind 1160 Lite

Deck

• Aluminium Hatches & portholes (9 in total) 
• All upgraded with privacy shades
• 4 x Forward Hatches 470mm x 470mm
  2 x Mid cabin hatches 470mm x 470mm
  1 x Port Bathroom window hatch 507mm x 377mm
  1 x Galley window hatch 507mm x 377mm
  1 x Aft Cabin window hatch 507mm x 377mm
• Fibreglass Deck Hatches:
  5 x Forward anchor & storage hatches.
  2 x Cockpit engine access hatches.
• 6 x Docking cleats. Each side : bow, stern & amidships.
• 6x Safety handles around cockpit.
• 1 x Heavy duty mooring cleat on forward walkway.
• Ventilation: 2 x forward cabin hatch vents.
• Mast base turning blocks. All halyards & sail controls to cockpit.
• 9 x Rope clutches.
• Sheet winches : 1 x 45ST – 2 speed self tailing, 2 x 40ST – 2 speed self tailing - Added Lewmar 45 electric winch
• Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines. With 700mm high lifelines to meet CE requirements.
• 2 x transom access gates with pelican hook releases.
• 2 x side access gates with pelican hook releases.
• Aft swim ladder: folding stainless aft swim ladder.
• Cockpit refrigerator

Accommodations

INTERIOR FINISH:

• New Lightweight interior redesign.
• Furniture and cabin sides gloss gelcoat finish.
• Cabin top lined with light weight internally molded gelcoat liner.
• New Floors: synthetic timber flooring.
• New Lightweight cupboard doors and trimmings

SALOON:

• New Lightweight grp saloon table
• Upholstered settee.
• New Lightweight grp coffee table
• Forward aluminium opening windows.
• Saloon side windows in 8mm toughened glass.
• Tri folding cockpit doors
• Removable low profile, helm hatches.

SLEEPING CABINS:

• Light weight pvc foam cored timber doors on all private cabins.
• Port & Starboard fwd cabins : Each queen sized bed (2050mm x 1540mm)
• Aft Starboard cabin : Double bed (1990mm x 1230mm)
• Mattresses 150mm ( 6” ) foam upholstered. Owner's cabin mattress upgraded to pillow top latex, custom made
• Cabins lined.
• 12volt LED lighting.
• Storage/Cupboards.

PORT HEAD:

• Polished light weight pvc foam cored timber door.
• Polished light weight pvc foam cored timber door.
• Electric toilet. Discharge via holding tank.
• Holding tank built in. Discharge pump out by shore station or directly overboard 130L.
• Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements.
• Vanity basin with pressure water.
• Separate shower stall with wall mounted shower head & mixer tap.
• Electric shower bilge pump with direct overboard discharge.
• Large quantity cupboards / shelves to very high quality

Galley

• Spacious galley with co-ordinated Polystone counter surfaces.
• Three (3) burner LPG stove, stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out.
• Oven with broiler
• Double bowl stainless steel sink.
• Pressure fresh water system.
• Filtered water tap
• Upgraded Refrigerator: Front opening upright fridge - stainless
• Under bench storage
• Trash bin.
• LPG solenoid control in galley
• Expanded cooling plate in bench freezer, providing even freezing

Engines

Yanmar 29Hp diesels with saildrives

Electrical

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors..
• Batteries x 3 comprising: House System (540 amp hrs) : 2 x 270 amp hr heavy duty batteries. One  engine cranking battery – 130 amp hr heavy duty battery.
• BATTERY CHARGER / INVERTER: MASTERVOLT 2600W/100AMP 110V 
• SOLAR PANEL UPGRADE FROM 2 X 125W TO 4 X 200W & MPPT CONTROLLER
• 230amp heavy duty isolation switch.
• 12 V lighting : Numerous 12V interior lamps and courtesy lights throughout including recessed lights in cockpit.
• 4 x 12V Outlets.
• CE approved navigation lights. Port & Starboard mounted on bow rails.
• Deck floodlight mounted on spreaders.
• Mast head anchor / riding light.

Mast/Boom/Sails

• Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig.
• Standing Rigging:
  – Forestay 3/8 (10mm) 1 x 19 Dieform wire.
  – Sidestays 3/8 (10mm) 1 x 19 Dieform wire.
  – Diamonds 5/16 (8mm) 1 x 19 Stainless Steel wire.
• Halyards:
  – Main halyard: 12mm Spectra rope : Heavy duty shackle.
  – Jib halyard: 8mm Spectra rope. Heavy duty shackle.
  – Topping lift: 8mm rope. Heavy duty shackle.
  – Boom outhaul: 10mm Spectra.
• Single line reefing, run to helm. Three reefing points with 2 reef lines:
  – Reef 1&3: 10mm rope. Leech/Clew blocks and snap shackle.
  – Reef 2: 10mm rope. Heavy duty shackle.
• Sheets:
  – Main sheet: 10mm rope
  – Main traveller control: 10mm rope
  – Jib sheet: 10mm rope
• All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches.
• Fully battened mainsail. Triple stitched reinforced construction. Leach adjustable batten end caps. Fibreglass sail battens.
• Mainsail cover with integrated lazy jack system.
• Self-tacking headsail, curved headsail traveller track with end stops. With New single line control sheet to cockpit.

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.