2024 Beneteau Oceanis 30.1

Design in accordance with European Directive requirements and according to CE certification

• Monolithic hull design in polyester

• Monolithic contact structural counter mould (Fabrics - resin) bonded to the hull

• Fiberglass and foam sandwich contact deck - coated with "diamond point" type non-slip

• Deck hull link bonded and screwed

• Cast iron keel fixed with bolts and stainless steel backing plates

• Twin rudders hung with stainless steel stock

• White coloured hull - Grey metal hull graphics

• 2 Hull portholes

• Standard mast (Z-Diffusion) 9/10 anodized aluminum installed on the deck, 1 Set of spreader

• Anodised aluminum boom

• Discontinuous stainless steel standing rigging (Forestay- Side shrouds)

• No backstay

• 1 Standard fore stay

• 1 Rigid boom vang with tackle

• 1 Jib furler with drum on deck

• 2 Mainsail sheet padeyes

• 1 Self-tacking jib sheet track with traveller attached to the deck

• Maneuvers brought back to roof (except boom topping lift - foot)

• Complete running rigging:

• 1 Mainsail halyard

• 1 Jib halyard with cleat and mast cleat

• 1 Boom topping lift with cleat on mast

• 1 Mainsail outhaul

• 1 Mainsail sheet (bridle on the roof)

• 2 Jib sheets

• 2 Rapid reefing lines

• 5 Clutches (to port)

• 1 Self tailing winch (H20.1 STA) on the coachroof (Port)

• 1 Aluminum Harken winch handle

• 1 Winch handle box

• Classic square topped mainsail (900 mm), semi battened with slides, Natural UV protection, horizontal section

• Self-tacking Jib on a furler Dacron with UV Natural protection, horizontal section

• Lazy Jack and Lazy Bag in Natural colour

• Self-draining chain locker - Clench bolt - Hatch cover

• Single roller stainless steel bow fitting with offset roller

• 6 Aluminum mooring cleats - Stainless steel chafing plate

• Self-draining cockpit in polyester

• 1 Starboard locker (Sail locker, Life raft storage)

• 1 Single gas compartment on the port side

• 1 Gas compartment under port helmsman seat

• Natural solid wood slatted cockpit benches

• Stainless steel tiller with telescopic tiller extension

• 1 Steering compass on the roof (Starboard)

• Engine throttle and control panel on starboard

• 2 Deck access for emergency tiller

• 1 Emergency tiller

• PMMA companionway hatch and door with guillotine door and height-adjustable coaming

• Stainless steel pulpit 2 sections

• 2 Stainless steel pushpits

• 1 Lifebuoy support bracket

• Welded ring on pushpit for flag

• Double guard lines and stainless steel stanchions

• Emergency ladder on pushpit

• Tilting transom with full opening (1,80m x 0,35m / 5’11’’ x 1’2’’)

• Manual control opening

• Natural solid wood sole

Build To Order